FHIR Osiris Implementation Guide
1.1.0 - trial-implementation
FHIR Osiris Implementation Guide
1.1.0 - trial-implementation
This page is part of the OSIRIS FHIR Implementation Guide (v1.1.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions
| Draft as of 2025-04-03 |
Definitions for the energyOrIsotope extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Définition | Energy Or Isotope Optional Extension Element - found in all resources. |
| Short | Energy Or IsotopeOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Définition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Résumé | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:quantityEnergyOrIsotope | |
| Nom de la slice | quantityEnergyOrIsotope |
| Définition | Energy spectrum of a radiation characterized by a maximum value. For electrons, the maximum energy is given in MeV. For photons, the maximum acceleration voltage is given in MV or kV, although these are not energy units. Dicom Tag (300A,0114). |
| Short | QuantityAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:quantityEnergyOrIsotope.extension | |
| Définition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Résumé | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:quantityEnergyOrIsotope.url | |
| Définition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Commentaires | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| Fixed Value | quantityEnergyOrIsotope |
| 10. Extension.extension:quantityEnergyOrIsotope.value[x] | |
| Définition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:nameEnergyOrIsotope | |
| Nom de la slice | nameEnergyOrIsotope |
| Définition | The isotope used for radiotherapy |
| Short | Isotope NameAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Extension.extension:nameEnergyOrIsotope.extension | |
| Définition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Résumé | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Extension.extension:nameEnergyOrIsotope.url | |
| Définition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Commentaires | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| Fixed Value | nameEnergyOrIsotope |
| 18. Extension.extension:nameEnergyOrIsotope.value[x] | |
| Définition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.url | |
| Définition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Commentaires | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| Fixed Value | https://ig-osiris.cancer.fr/ig/osiris/StructureDefinition/energyOrIsotope |
| 22. Extension.value[x] | |
| Définition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Définition | Energy Or Isotope |
| Short | Energy Or Isotope |
| 2. Extension.extension | |
| Control | 1..? |
| 4. Extension.extension:quantityEnergyOrIsotope | |
| Nom de la slice | quantityEnergyOrIsotope |
| Définition | Energy spectrum of a radiation characterized by a maximum value. For electrons, the maximum energy is given in MeV. For photons, the maximum acceleration voltage is given in MV or kV, although these are not energy units. Dicom Tag (300A,0114). |
| Short | Quantity |
| Control | 1..1 |
| Must Support | true |
| 6. Extension.extension:quantityEnergyOrIsotope.extension | |
| Control | 0..0 |
| 8. Extension.extension:quantityEnergyOrIsotope.url | |
| Fixed Value | quantityEnergyOrIsotope |
| 10. Extension.extension:quantityEnergyOrIsotope.value[x] | |
| Control | 1..? |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Must Support | true |
| 12. Extension.extension:nameEnergyOrIsotope | |
| Nom de la slice | nameEnergyOrIsotope |
| Définition | The isotope used for radiotherapy |
| Short | Isotope Name |
| Control | 0..1 |
| Must Support | true |
| 14. Extension.extension:nameEnergyOrIsotope.extension | |
| Control | 0..0 |
| 16. Extension.extension:nameEnergyOrIsotope.url | |
| Fixed Value | nameEnergyOrIsotope |
| 18. Extension.extension:nameEnergyOrIsotope.value[x] | |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| 20. Extension.url | |
| Fixed Value | https://ig-osiris.cancer.fr/ig/osiris/StructureDefinition/energyOrIsotope |
| 22. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Définition | Energy Or Isotope |
| Short | Energy Or Isotope |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| 4. Extension.extension | |
| Définition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:quantityEnergyOrIsotope | |
| Nom de la slice | quantityEnergyOrIsotope |
| Définition | Energy spectrum of a radiation characterized by a maximum value. For electrons, the maximum energy is given in MeV. For photons, the maximum acceleration voltage is given in MV or kV, although these are not energy units. Dicom Tag (300A,0114). |
| Short | Quantity |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:quantityEnergyOrIsotope.id | |
| Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| 10. Extension.extension:quantityEnergyOrIsotope.extension | |
| Définition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:quantityEnergyOrIsotope.url | |
| Définition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Commentaires | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| Fixed Value | quantityEnergyOrIsotope |
| 14. Extension.extension:quantityEnergyOrIsotope.value[x] | |
| Définition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:nameEnergyOrIsotope | |
| Nom de la slice | nameEnergyOrIsotope |
| Définition | The isotope used for radiotherapy |
| Short | Isotope Name |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:nameEnergyOrIsotope.id | |
| Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| 20. Extension.extension:nameEnergyOrIsotope.extension | |
| Définition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:nameEnergyOrIsotope.url | |
| Définition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Commentaires | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| Fixed Value | nameEnergyOrIsotope |
| 24. Extension.extension:nameEnergyOrIsotope.value[x] | |
| Définition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.url | |
| Définition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Commentaires | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Résumé | false |
| Fixed Value | https://ig-osiris.cancer.fr/ig/osiris/StructureDefinition/energyOrIsotope |
| 28. Extension.value[x] | |
| Définition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Résumé | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |