Search FHIR

FHIR Osiris Implementation Guide
1.1.0 - trial-implementation

This page is part of the OSIRIS FHIR Implementation Guide (v1.1.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: AnnotationReference - Detailed Descriptions

Draft as of 2025-04-03

Definitions for the annotation-reference resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MolecularSequence
Définition

Raw data describing a biological sequence.

ShortInformation about a biological sequence
Control0..*
Is Modifierfalse
Résuméfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
msq-3: Only 0 and 1 are valid for coordinateSystem (coordinateSystem = 1 or coordinateSystem = 0)
msq-3: Only 0 and 1 are valid for coordinateSystem (coordinateSystem = 1 or coordinateSystem = 0)
2. MolecularSequence.implicitRules
Définition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Commentaires

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. MolecularSequence.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Résuméfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. MolecularSequence.coordinateSystem
Définition

Whether the sequence is numbered starting at 0 (0-based numbering or coordinates, inclusive start, exclusive end) or starting at 1 (1-based numbering, inclusive start and inclusive end).

ShortBase number of coordinate system (0 for 0-based numbering or coordinates, inclusive start, exclusive end, 1 for 1-based numbering, inclusive start, inclusive end)
Control1..1
Typeinteger
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Résumétrue
Pattern Value0
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. MolecularSequence.patient
Définition

The patient whose sequencing results are described by this resource.

ShortWho and/or what this is about
Control0..1
TypeReference(Oncology Patient, Patient)
Is Modifierfalse
Must Supporttrue
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. MolecularSequence.referenceSeq
Définition

A sequence that is used as a reference to describe variants that are present in a sequence analyzed.

ShortA sequence used as reference
Control0..1
TypeBackboneElement
Is Modifierfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
msq-5: GenomeBuild and chromosome must be both contained if either one of them is contained ((chromosome.empty() and genomeBuild.empty()) or (chromosome.exists() and genomeBuild.exists()))
msq-6: Have and only have one of the following elements in referenceSeq : 1. genomeBuild ; 2 referenceSeqId; 3. referenceSeqPointer; 4. referenceSeqString; ((genomeBuild.count()+referenceSeqId.count()+ referenceSeqPointer.count()+ referenceSeqString.count()) = 1)
msq-5: GenomeBuild and chromosome must be both contained if either one of them is contained ((chromosome.empty() and genomeBuild.empty()) or (chromosome.exists() and genomeBuild.exists()))
msq-6: Have and only have one of the following elements in referenceSeq : 1. genomeBuild ; 2 referenceSeqId; 3. referenceSeqPointer; 4. referenceSeqString; ((genomeBuild.count()+referenceSeqId.count()+ referenceSeqPointer.count()+ referenceSeqString.count()) = 1)
12. MolecularSequence.referenceSeq.modifierExtension
Définition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Commentaires

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumétrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. MolecularSequence.referenceSeq.orientation
Définition

Strand orientation of the annotation DNA


A relative reference to a DNA strand based on gene orientation. The strand that contains the open reading frame of the gene is the "sense" strand, and the opposite complementary strand is the "antisense" strand.

ShortDNA strand orientationsense | antisense
Control0..1
BindingThe codes SHALL be taken from orientationTypehttp://hl7.org/fhir/ValueSet/orientation-type|4.0.1
(required to http://hl7.org/fhir/ValueSet/orientation-type|4.0.1)

Type for orientation.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. MolecularSequence.referenceSeq.referenceSeqId
Définition

Type of the annotation referenced to describe the molecular entity


Reference identifier of reference sequence submitted to NCBI. It must match the type in the MolecularSequence.type field. For example, the prefix, “NG_” identifies reference sequence for genes, “NM_” for messenger RNA transcripts, and “NP_” for amino acid sequences.

ShortType of the referenced annotationReference identifier
Control10..1
BindingUnless not suitable, these codes SHALL be taken from For example codes, see Reference Type Value Sethttp://hl7.org/fhir/ValueSet/sequence-referenceSeq
(extensible to https://ig-osiris.cancer.fr/ig/osiris/ValueSet/ReferenceType)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. MolecularSequence.repository
Définition

Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

ShortExternal repository which contains detailed report related with observedSeq in this resource
Control10..*
TypeBackboneElement
Is Modifierfalse
Résumétrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on MolecularSequence.repository. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
  • 20. MolecularSequence.repository.modifierExtension
    Définition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Commentaires

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Résumétrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. MolecularSequence.repository.type
    Définition

    Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

    Shortdirectlink | openapi | login | oauth | other
    Control1..1
    BindingThe codes SHALL be taken from repositoryTypehttp://hl7.org/fhir/ValueSet/repository-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

    Type for access of external URI.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. MolecularSequence.repository:reference-db
    Nom de la slicereference-db
    Définition

    Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

    ShortExternal repository which contains detailed report related with observedSeq in this resource
    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. MolecularSequence.repository:reference-db.modifierExtension
    Définition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Commentaires

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Résumétrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. MolecularSequence.repository:reference-db.type
    Définition

    Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

    Shortdirectlink | openapi | login | oauth | other
    Control1..1
    BindingThe codes SHALL be taken from repositoryTypehttp://hl7.org/fhir/ValueSet/repository-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

    Type for access of external URI.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Résumétrue
    Pattern Valueother
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. MolecularSequence.repository:reference-db.name
    Définition

    Reference database name


    URI of an external repository which contains further details about the genetics data.

    ShortReference database nameRepository's name
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. MolecularSequence.repository:reference-db.datasetId
    Définition

    Identifier of the annotation in the database


    Id of the variant in this external repository. The server will understand how to use this id to call for more info about datasets in external repository.

    ShortIdentifier of the annotation in the databaseId of the dataset that used to call for dataset in repository
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. MolecularSequence.repository:pfam-domain
    Nom de la slicepfam-domain
    Définition

    Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

    ShortExternal repository which contains detailed report related with observedSeq in this resource
    Control0..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. MolecularSequence.repository:pfam-domain.modifierExtension
    Définition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Commentaires

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Résumétrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    38. MolecularSequence.repository:pfam-domain.type
    Définition

    Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

    Shortdirectlink | openapi | login | oauth | other
    Control1..1
    BindingThe codes SHALL be taken from repositoryTypehttp://hl7.org/fhir/ValueSet/repository-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

    Type for access of external URI.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Résumétrue
    Pattern Valuedirectlink
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. MolecularSequence.repository:pfam-domain.url
    Définition

    URI of an external repository which contains further details about the genetics data.

    ShortURI of the repository
    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Résumétrue
    Pattern Valuehttp://pfam.xfam.org/
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. MolecularSequence.repository:pfam-domain.name
    Définition

    URI of an external repository which contains further details about the genetics data.

    ShortRepository's name
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Résumétrue
    Pattern Valuepfam
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. MolecularSequence.repository:pfam-domain.datasetId
    Définition

    Identifier in the database of protein families and protein domains (Pfam) containing the genetic alteration.


    Id of the variant in this external repository. The server will understand how to use this id to call for more info about datasets in external repository.

    ShortPfam IDId of the dataset that used to call for dataset in repository
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. MolecularSequence.repository:pfam-domain.readsetId
    Définition

    Name of the protein domain in the Pfam database containing the genetic alteration.


    Id of the read in this external repository.

    ShortPfam domain nameId of the read
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Résumétrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. MolecularSequence
    2. MolecularSequence.coordinateSystem
    Pattern Value0
    4. MolecularSequence.patient
    TypeReference(Oncology Patient)
    Must Supporttrue
    6. MolecularSequence.referenceSeq
    8. MolecularSequence.referenceSeq.orientation
    Définition

    Strand orientation of the annotation DNA

    ShortDNA strand orientation
    Must Supporttrue
    10. MolecularSequence.referenceSeq.referenceSeqId
    Définition

    Type of the annotation referenced to describe the molecular entity

    ShortType of the referenced annotation
    Control1..?
    BindingUnless not suitable, these codes SHALL be taken from Reference Type Value Set
    (extensible to https://ig-osiris.cancer.fr/ig/osiris/ValueSet/ReferenceType)
    Must Supporttrue
    12. MolecularSequence.repository
    Control1..?
    SlicingThis element introduces a set of slices on MolecularSequence.repository. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ type
    • 14. MolecularSequence.repository:reference-db
      Nom de la slicereference-db
      Control1..1
      16. MolecularSequence.repository:reference-db.type
      Pattern Valueother
      18. MolecularSequence.repository:reference-db.name
      Définition

      Reference database name

      ShortReference database name
      Control1..?
      Must Supporttrue
      20. MolecularSequence.repository:reference-db.datasetId
      Définition

      Identifier of the annotation in the database

      ShortIdentifier of the annotation in the database
      Control1..?
      Must Supporttrue
      22. MolecularSequence.repository:pfam-domain
      Nom de la slicepfam-domain
      Control0..1
      Must Supporttrue
      24. MolecularSequence.repository:pfam-domain.type
      Pattern Valuedirectlink
      26. MolecularSequence.repository:pfam-domain.url
      Pattern Valuehttp://pfam.xfam.org/
      28. MolecularSequence.repository:pfam-domain.name
      Pattern Valuepfam
      30. MolecularSequence.repository:pfam-domain.datasetId
      Définition

      Identifier in the database of protein families and protein domains (Pfam) containing the genetic alteration.

      ShortPfam ID
      Must Supporttrue
      32. MolecularSequence.repository:pfam-domain.readsetId
      Définition

      Name of the protein domain in the Pfam database containing the genetic alteration.

      ShortPfam domain name
      Must Supporttrue

      Guidance on how to interpret the contents of this table can be found here

      0. MolecularSequence
      Définition

      Raw data describing a biological sequence.

      ShortInformation about a biological sequence
      Control0..*
      Is Modifierfalse
      Résuméfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      msq-3: Only 0 and 1 are valid for coordinateSystem (coordinateSystem = 1 or coordinateSystem = 0)
      2. MolecularSequence.id
      Définition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Commentaires

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Résumétrue
      4. MolecularSequence.meta
      Définition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. MolecularSequence.implicitRules
      Définition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Commentaires

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. MolecularSequence.language
      Définition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Commentaires

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Bindings AdditionnelsBut
      AllLanguagesBinding Max
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résuméfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. MolecularSequence.text
      Définition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Commentaires

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Résuméfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. MolecularSequence.contained
      Définition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Commentaires

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Résuméfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. MolecularSequence.extension
      Définition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Résuméfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. MolecularSequence.modifierExtension
      Définition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Résuméfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. MolecularSequence.identifier
      Définition

      A unique identifier for this particular sequence instance. This is a FHIR-defined id.

      ShortUnique ID for this particular sequence. This is a FHIR-defined id
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Résumétrue
      Requirements

      Allows sequences to be distinguished and referenced.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. MolecularSequence.type
      Définition

      Amino Acid Sequence/ DNA Sequence / RNA Sequence.

      Shortaa | dna | rna
      Control0..1
      BindingThe codes SHALL be taken from sequenceType
      (required to http://hl7.org/fhir/ValueSet/sequence-type|4.0.1)

      Type if a sequence -- DNA, RNA, or amino acid sequence.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. MolecularSequence.coordinateSystem
      Définition

      Whether the sequence is numbered starting at 0 (0-based numbering or coordinates, inclusive start, exclusive end) or starting at 1 (1-based numbering, inclusive start and inclusive end).

      ShortBase number of coordinate system (0 for 0-based numbering or coordinates, inclusive start, exclusive end, 1 for 1-based numbering, inclusive start, inclusive end)
      Control1..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Pattern Value0
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. MolecularSequence.patient
      Définition

      The patient whose sequencing results are described by this resource.

      ShortWho and/or what this is about
      Control0..1
      TypeReference(Oncology Patient)
      Is Modifierfalse
      Must Supporttrue
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. MolecularSequence.specimen
      Définition

      Specimen used for sequencing.

      ShortSpecimen used for sequencing
      Control0..1
      TypeReference(Specimen)
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. MolecularSequence.device
      Définition

      The method for sequencing, for example, chip information.

      ShortThe method for sequencing
      Control0..1
      TypeReference(Device)
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. MolecularSequence.performer
      Définition

      The organization or lab that should be responsible for this result.

      ShortWho should be responsible for test result
      Control0..1
      TypeReference(Organization)
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. MolecularSequence.quantity
      Définition

      The number of copies of the sequence of interest. (RNASeq).

      ShortThe number of copies of the sequence of interest. (RNASeq)
      Control0..1
      TypeQuantity
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. MolecularSequence.referenceSeq
      Définition

      A sequence that is used as a reference to describe variants that are present in a sequence analyzed.

      ShortA sequence used as reference
      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      msq-5: GenomeBuild and chromosome must be both contained if either one of them is contained ((chromosome.empty() and genomeBuild.empty()) or (chromosome.exists() and genomeBuild.exists()))
      msq-6: Have and only have one of the following elements in referenceSeq : 1. genomeBuild ; 2 referenceSeqId; 3. referenceSeqPointer; 4. referenceSeqString; ((genomeBuild.count()+referenceSeqId.count()+ referenceSeqPointer.count()+ referenceSeqString.count()) = 1)
      36. MolecularSequence.referenceSeq.id
      Définition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Résuméfalse
      38. MolecularSequence.referenceSeq.extension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Résuméfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      40. MolecularSequence.referenceSeq.modifierExtension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Résumétrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      42. MolecularSequence.referenceSeq.chromosome
      Définition

      Structural unit composed of a nucleic acid molecule which controls its own replication through the interaction of specific proteins at one or more origins of replication (SO:0000340).

      ShortChromosome containing genetic finding
      Control0..1
      BindingFor example codes, see chromosome-human
      (example to http://hl7.org/fhir/ValueSet/chromosome-human)

      Chromosome number for human.

      TypeCodeableConcept
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      44. MolecularSequence.referenceSeq.genomeBuild
      Définition

      The Genome Build used for reference, following GRCh build versions e.g. 'GRCh 37'. Version number must be included if a versioned release of a primary build was used.

      ShortThe Genome Build used for reference, following GRCh build versions e.g. 'GRCh 37'
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. MolecularSequence.referenceSeq.orientation
      Définition

      Strand orientation of the annotation DNA

      ShortDNA strand orientation
      Control0..1
      BindingThe codes SHALL be taken from orientationType
      (required to http://hl7.org/fhir/ValueSet/orientation-type|4.0.1)

      Type for orientation.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      48. MolecularSequence.referenceSeq.referenceSeqId
      Définition

      Type of the annotation referenced to describe the molecular entity

      ShortType of the referenced annotation
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from Reference Type Value Set
      (extensible to https://ig-osiris.cancer.fr/ig/osiris/ValueSet/ReferenceType)
      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      50. MolecularSequence.referenceSeq.referenceSeqPointer
      Définition

      A pointer to another MolecularSequence entity as reference sequence.

      ShortA pointer to another MolecularSequence entity as reference sequence
      Control0..1
      TypeReference(MolecularSequence)
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. MolecularSequence.referenceSeq.referenceSeqString
      Définition

      A string like "ACGT".

      ShortA string to represent reference sequence
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. MolecularSequence.referenceSeq.strand
      Définition

      An absolute reference to a strand. The Watson strand is the strand whose 5'-end is on the short arm of the chromosome, and the Crick strand as the one whose 5'-end is on the long arm.

      Shortwatson | crick
      Control0..1
      BindingThe codes SHALL be taken from strandType
      (required to http://hl7.org/fhir/ValueSet/strand-type|4.0.1)

      Type for strand.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. MolecularSequence.referenceSeq.windowStart
      Définition

      Start position of the window on the reference sequence. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

      ShortStart position of the window on the reference sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      58. MolecularSequence.referenceSeq.windowEnd
      Définition

      End position of the window on the reference sequence. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

      ShortEnd position of the window on the reference sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. MolecularSequence.variant
      Définition

      The definition of variant here originates from Sequence ontology (variant_of). This element can represent amino acid or nucleic sequence change(including insertion,deletion,SNP,etc.) It can represent some complex mutation or segment variation with the assist of CIGAR string.

      ShortVariant in sequence
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      62. MolecularSequence.variant.id
      Définition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Résuméfalse
      64. MolecularSequence.variant.extension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Résuméfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      66. MolecularSequence.variant.modifierExtension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Résumétrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      68. MolecularSequence.variant.start
      Définition

      Start position of the variant on the reference sequence. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

      ShortStart position of the variant on the reference sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. MolecularSequence.variant.end
      Définition

      End position of the variant on the reference sequence. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

      ShortEnd position of the variant on the reference sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      72. MolecularSequence.variant.observedAllele
      Définition

      An allele is one of a set of coexisting sequence variants of a gene (SO:0001023). Nucleotide(s)/amino acids from start position of sequence to stop position of sequence on the positive (+) strand of the observed sequence. When the sequence type is DNA, it should be the sequence on the positive (+) strand. This will lay in the range between variant.start and variant.end.

      ShortAllele that was observed
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. MolecularSequence.variant.referenceAllele
      Définition

      An allele is one of a set of coexisting sequence variants of a gene (SO:0001023). Nucleotide(s)/amino acids from start position of sequence to stop position of sequence on the positive (+) strand of the reference sequence. When the sequence type is DNA, it should be the sequence on the positive (+) strand. This will lay in the range between variant.start and variant.end.

      ShortAllele in the reference sequence
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      76. MolecularSequence.variant.cigar
      Définition

      Extended CIGAR string for aligning the sequence with reference bases. See detailed documentation here.

      ShortExtended CIGAR string for aligning the sequence with reference bases
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. MolecularSequence.variant.variantPointer
      Définition

      A pointer to an Observation containing variant information.

      ShortPointer to observed variant information
      Control0..1
      TypeReference(Observation)
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      80. MolecularSequence.observedSeq
      Définition

      Sequence that was observed. It is the result marked by referenceSeq along with variant records on referenceSeq. This shall start from referenceSeq.windowStart and end by referenceSeq.windowEnd.

      ShortSequence that was observed
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. MolecularSequence.quality
      Définition

      An experimental feature attribute that defines the quality of the feature in a quantitative way, such as a phred quality score (SO:0001686).

      ShortAn set of value as quality of sequence
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      84. MolecularSequence.quality.id
      Définition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Résuméfalse
      86. MolecularSequence.quality.extension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Résuméfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      88. MolecularSequence.quality.modifierExtension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Résumétrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      90. MolecularSequence.quality.type
      Définition

      INDEL / SNP / Undefined variant.

      Shortindel | snp | unknown
      Control1..1
      BindingThe codes SHALL be taken from qualityType
      (required to http://hl7.org/fhir/ValueSet/quality-type|4.0.1)

      Type for quality report.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      92. MolecularSequence.quality.standardSequence
      Définition

      Gold standard sequence used for comparing against.

      ShortStandard sequence for comparison
      Control0..1
      BindingFor example codes, see FDA-StandardSequence
      (example to http://hl7.org/fhir/ValueSet/sequence-quality-standardSequence)

      Reference identifier of the sequence that used to mark the quality of tested samples.

      TypeCodeableConcept
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      94. MolecularSequence.quality.start
      Définition

      Start position of the sequence. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

      ShortStart position of the sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      96. MolecularSequence.quality.end
      Définition

      End position of the sequence. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

      ShortEnd position of the sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      98. MolecularSequence.quality.score
      Définition

      The score of an experimentally derived feature such as a p-value (SO:0001685).

      ShortQuality score for the comparison
      Control0..1
      TypeQuantity
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      100. MolecularSequence.quality.method
      Définition

      Which method is used to get sequence quality.

      ShortMethod to get quality
      Control0..1
      BindingFor example codes, see FDA-Method
      (example to http://hl7.org/fhir/ValueSet/sequence-quality-method)

      The method used to evaluate the numerical quality of the observed sequence.

      TypeCodeableConcept
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      102. MolecularSequence.quality.truthTP
      Définition

      True positives, from the perspective of the truth data, i.e. the number of sites in the Truth Call Set for which there are paths through the Query Call Set that are consistent with all of the alleles at this site, and for which there is an accurate genotype call for the event.

      ShortTrue positives from the perspective of the truth data
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      104. MolecularSequence.quality.queryTP
      Définition

      True positives, from the perspective of the query data, i.e. the number of sites in the Query Call Set for which there are paths through the Truth Call Set that are consistent with all of the alleles at this site, and for which there is an accurate genotype call for the event.

      ShortTrue positives from the perspective of the query data
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      106. MolecularSequence.quality.truthFN
      Définition

      False negatives, i.e. the number of sites in the Truth Call Set for which there is no path through the Query Call Set that is consistent with all of the alleles at this site, or sites for which there is an inaccurate genotype call for the event. Sites with correct variant but incorrect genotype are counted here.

      ShortFalse negatives
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      108. MolecularSequence.quality.queryFP
      Définition

      False positives, i.e. the number of sites in the Query Call Set for which there is no path through the Truth Call Set that is consistent with this site. Sites with correct variant but incorrect genotype are counted here.

      ShortFalse positives
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      110. MolecularSequence.quality.gtFP
      Définition

      The number of false positives where the non-REF alleles in the Truth and Query Call Sets match (i.e. cases where the truth is 1/1 and the query is 0/1 or similar).

      ShortFalse positives where the non-REF alleles in the Truth and Query Call Sets match
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      112. MolecularSequence.quality.precision
      Définition

      QUERY.TP / (QUERY.TP + QUERY.FP).

      ShortPrecision of comparison
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      114. MolecularSequence.quality.recall
      Définition

      TRUTH.TP / (TRUTH.TP + TRUTH.FN).

      ShortRecall of comparison
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      116. MolecularSequence.quality.fScore
      Définition

      Harmonic mean of Recall and Precision, computed as: 2 * precision * recall / (precision + recall).

      ShortF-score
      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      118. MolecularSequence.quality.roc
      Définition

      Receiver Operator Characteristic (ROC) Curve to give sensitivity/specificity tradeoff.

      ShortReceiver Operator Characteristic (ROC) Curve
      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      120. MolecularSequence.quality.roc.id
      Définition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Résuméfalse
      122. MolecularSequence.quality.roc.extension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Résuméfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      124. MolecularSequence.quality.roc.modifierExtension
      Définition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Commentaires

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Résumétrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      126. MolecularSequence.quality.roc.score
      Définition

      Invidual data point representing the GQ (genotype quality) score threshold.

      ShortGenotype quality score
      Control0..*
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      128. MolecularSequence.quality.roc.numTP
      Définition

      The number of true positives if the GQ score threshold was set to "score" field value.

      ShortRoc score true positive numbers
      Control0..*
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      130. MolecularSequence.quality.roc.numFP
      Définition

      The number of false positives if the GQ score threshold was set to "score" field value.

      ShortRoc score false positive numbers
      Control0..*
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      132. MolecularSequence.quality.roc.numFN
      Définition

      The number of false negatives if the GQ score threshold was set to "score" field value.

      ShortRoc score false negative numbers
      Control0..*
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      134. MolecularSequence.quality.roc.precision
      Définition

      Calculated precision if the GQ score threshold was set to "score" field value.

      ShortPrecision of the GQ score
      Control0..*
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      136. MolecularSequence.quality.roc.sensitivity
      Définition

      Calculated sensitivity if the GQ score threshold was set to "score" field value.

      ShortSensitivity of the GQ score
      Control0..*
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      138. MolecularSequence.quality.roc.fMeasure
      Définition

      Calculated fScore if the GQ score threshold was set to "score" field value.

      ShortFScore of the GQ score
      Control0..*
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      140. MolecularSequence.readCoverage
      Définition

      Coverage (read depth or depth) is the average number of reads representing a given nucleotide in the reconstructed sequence.

      ShortAverage number of reads representing a given nucleotide in the reconstructed sequence
      Control0..1
      Typeinteger
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      142. MolecularSequence.repository
      Définition

      Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

      ShortExternal repository which contains detailed report related with observedSeq in this resource
      Control1..*
      TypeBackboneElement
      Is Modifierfalse
      Résumétrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on MolecularSequence.repository. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ type
      • 144. MolecularSequence.repository.id
        Définition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Résuméfalse
        146. MolecularSequence.repository.extension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Résuméfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        148. MolecularSequence.repository.modifierExtension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Résumétrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        150. MolecularSequence.repository.type
        Définition

        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

        Shortdirectlink | openapi | login | oauth | other
        Control1..1
        BindingThe codes SHALL be taken from repositoryType
        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

        Type for access of external URI.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        152. MolecularSequence.repository.url
        Définition

        URI of an external repository which contains further details about the genetics data.

        ShortURI of the repository
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        154. MolecularSequence.repository.name
        Définition

        URI of an external repository which contains further details about the genetics data.

        ShortRepository's name
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        156. MolecularSequence.repository.datasetId
        Définition

        Id of the variant in this external repository. The server will understand how to use this id to call for more info about datasets in external repository.

        ShortId of the dataset that used to call for dataset in repository
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        158. MolecularSequence.repository.variantsetId
        Définition

        Id of the variantset in this external repository. The server will understand how to use this id to call for more info about variantsets in external repository.

        ShortId of the variantset that used to call for variantset in repository
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        160. MolecularSequence.repository.readsetId
        Définition

        Id of the read in this external repository.

        ShortId of the read
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        162. MolecularSequence.repository:reference-db
        Nom de la slicereference-db
        Définition

        Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

        ShortExternal repository which contains detailed report related with observedSeq in this resource
        Control1..1
        TypeBackboneElement
        Is Modifierfalse
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        164. MolecularSequence.repository:reference-db.id
        Définition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Résuméfalse
        166. MolecularSequence.repository:reference-db.extension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Résuméfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        168. MolecularSequence.repository:reference-db.modifierExtension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Résumétrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        170. MolecularSequence.repository:reference-db.type
        Définition

        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

        Shortdirectlink | openapi | login | oauth | other
        Control1..1
        BindingThe codes SHALL be taken from repositoryType
        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

        Type for access of external URI.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Pattern Valueother
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        172. MolecularSequence.repository:reference-db.url
        Définition

        URI of an external repository which contains further details about the genetics data.

        ShortURI of the repository
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        174. MolecularSequence.repository:reference-db.name
        Définition

        Reference database name

        ShortReference database name
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        176. MolecularSequence.repository:reference-db.datasetId
        Définition

        Identifier of the annotation in the database

        ShortIdentifier of the annotation in the database
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        178. MolecularSequence.repository:reference-db.variantsetId
        Définition

        Id of the variantset in this external repository. The server will understand how to use this id to call for more info about variantsets in external repository.

        ShortId of the variantset that used to call for variantset in repository
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        180. MolecularSequence.repository:reference-db.readsetId
        Définition

        Id of the read in this external repository.

        ShortId of the read
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        182. MolecularSequence.repository:pfam-domain
        Nom de la slicepfam-domain
        Définition

        Configurations of the external repository. The repository shall store target's observedSeq or records related with target's observedSeq.

        ShortExternal repository which contains detailed report related with observedSeq in this resource
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        184. MolecularSequence.repository:pfam-domain.id
        Définition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Résuméfalse
        186. MolecularSequence.repository:pfam-domain.extension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Résuméfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        188. MolecularSequence.repository:pfam-domain.modifierExtension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Résumétrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        190. MolecularSequence.repository:pfam-domain.type
        Définition

        Click and see / RESTful API / Need login to see / RESTful API with authentication / Other ways to see resource.

        Shortdirectlink | openapi | login | oauth | other
        Control1..1
        BindingThe codes SHALL be taken from repositoryType
        (required to http://hl7.org/fhir/ValueSet/repository-type|4.0.1)

        Type for access of external URI.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Pattern Valuedirectlink
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        192. MolecularSequence.repository:pfam-domain.url
        Définition

        URI of an external repository which contains further details about the genetics data.

        ShortURI of the repository
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Pattern Valuehttp://pfam.xfam.org/
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        194. MolecularSequence.repository:pfam-domain.name
        Définition

        URI of an external repository which contains further details about the genetics data.

        ShortRepository's name
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Pattern Valuepfam
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        196. MolecularSequence.repository:pfam-domain.datasetId
        Définition

        Identifier in the database of protein families and protein domains (Pfam) containing the genetic alteration.

        ShortPfam ID
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        198. MolecularSequence.repository:pfam-domain.variantsetId
        Définition

        Id of the variantset in this external repository. The server will understand how to use this id to call for more info about variantsets in external repository.

        ShortId of the variantset that used to call for variantset in repository
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        200. MolecularSequence.repository:pfam-domain.readsetId
        Définition

        Name of the protein domain in the Pfam database containing the genetic alteration.

        ShortPfam domain name
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        202. MolecularSequence.pointer
        Définition

        Pointer to next atomic sequence which at most contains one variant.

        ShortPointer to next atomic sequence
        Control0..*
        TypeReference(MolecularSequence)
        Is Modifierfalse
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        204. MolecularSequence.structureVariant
        Définition

        Information about chromosome structure variation.

        ShortStructural variant
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        206. MolecularSequence.structureVariant.id
        Définition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Résuméfalse
        208. MolecularSequence.structureVariant.extension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Résuméfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        210. MolecularSequence.structureVariant.modifierExtension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Résumétrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        212. MolecularSequence.structureVariant.variantType
        Définition

        Information about chromosome structure variation DNA change type.

        ShortStructural variant change type
        Control0..1
        BindingThe codes SHALL be taken from LOINC Answer List LL379-9|4.0.1
        (required to http://loinc.org/vs/LL379-9|4.0.1)

        DNA change type.

        TypeCodeableConcept
        Is Modifierfalse
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        214. MolecularSequence.structureVariant.exact
        Définition

        Used to indicate if the outer and inner start-end values have the same meaning.

        ShortDoes the structural variant have base pair resolution breakpoints?
        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        216. MolecularSequence.structureVariant.length
        Définition

        Length of the variant chromosome.

        ShortStructural variant length
        Control0..1
        Typeinteger
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        218. MolecularSequence.structureVariant.outer
        Définition

        Structural variant outer.

        ShortStructural variant outer
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        220. MolecularSequence.structureVariant.outer.id
        Définition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Résuméfalse
        222. MolecularSequence.structureVariant.outer.extension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Résuméfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        224. MolecularSequence.structureVariant.outer.modifierExtension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Résumétrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        226. MolecularSequence.structureVariant.outer.start
        Définition

        Structural variant outer start. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

        ShortStructural variant outer start
        Control0..1
        Typeinteger
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        228. MolecularSequence.structureVariant.outer.end
        Définition

        Structural variant outer end. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

        ShortStructural variant outer end
        Control0..1
        Typeinteger
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        230. MolecularSequence.structureVariant.inner
        Définition

        Structural variant inner.

        ShortStructural variant inner
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        232. MolecularSequence.structureVariant.inner.id
        Définition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Résuméfalse
        234. MolecularSequence.structureVariant.inner.extension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Résuméfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        236. MolecularSequence.structureVariant.inner.modifierExtension
        Définition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Commentaires

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Résumétrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        238. MolecularSequence.structureVariant.inner.start
        Définition

        Structural variant inner start. If the coordinate system is either 0-based or 1-based, then start position is inclusive.

        ShortStructural variant inner start
        Control0..1
        Typeinteger
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        240. MolecularSequence.structureVariant.inner.end
        Définition

        Structural variant inner end. If the coordinate system is 0-based then end is exclusive and does not include the last position. If the coordinate system is 1-base, then end is inclusive and includes the last position.

        ShortStructural variant inner end
        Control0..1
        Typeinteger
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Résumétrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))